Full Controll Of Your Dedicated Server

30
Jun/09
0

Installation Process

At RackISP we believe that you as a customer should be in full controll of your own dedicated server. The order and installation process are fully automated so you can setup your server just the way you like it.

Control Panel

You can install additional software packages, select an available operating system and you have full access to the KVM Switch and APC Reboot Switch. You can use Plesk, Cpanel or any other Control Panel you wish but you can also try use our Control Panel “Syncer”.

IP/Mac Binding

We use advanced IP/Mac binding to keep your ip space secure. This means that your own ip space can’t be used by any other customer in our network. This could happen if a customer were to make a misstake in configuring the server network interfaces.

Ipmi

Ipmi stands for “Intelligent Platform Management Interface”. IPMI operates independently of the operating system and allows administrators to manage a system remotely even in the absence of an operating system or the system management software, or even if the monitored system is powered off, but connected to a power source.

APC Remote Reboot

In worst case scenarios you can allways rely on our Remote Reboot Switches from APC. We have never had any issues regarding these switches. For more information please check the APC PDU page

KVM

In some cases it can be a relief to know that you can use a tool that practically lets you configure your server just as if you were with us in the datacenter. KVM stands for “Keyboard Visual Display Unit, Mouse”.

UPS

We have setup several UPS devices that filter out any spikes in the power supply. Our UPS devices also make sure that there is enough time available for the power generators to kick in.

Network

High quality redundant network with direct connections to AMS-IX, NL-IX and NDIX. High quality transit partners and 100% network uptime in the past 4 years.

RackISP servers include:

* Syncer ™ based control panel
* Phone support
* Free Setup
* 100 Mbit full-duplex uplink
* 3 Hour H/W replacement
* Remote reboots
* Remote KVM

Bookmark and Share

New Supermicro Servers

29
Jun/09
0

We recently placed 20 new Supermicro Servers, which are now ready for customers in need of a dedicted server. The server specs are:

Processor :

Intel core QUAD X3350 2.66 Ghz
1333Mhz with 12MB Cache

Memory : 4096MB (Kingston DDR2 800 PC6400 ECC)

Hard Drive : 500 GB (2x Seagate SATA II NS disks mirrored
by 128MB 3ware 9650SE raid controller)

If you are in need of a new server and want to stay in full control then just place an order on our dedicated server hosting page and we will have your server up and running in no time.

Bookmark and Share

RackISP Blogging

29
Jun/09
0

With this weblog we will try and keep you up to date regarding the RackISP network, hardware and software used.

Bookmark and Share